PORSCHE CAYMAN S ENGINE TIN WARE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,666.60
Make a selection
Stoptech big brake kit front drilled yellow caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit rear slotted red caliper Porsche 997 GT3 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optimal ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
$3,126.60
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in and it is a good idea to check your starters hardware as well.
Features: Bosch remanufactured starter from Germany. Armature continuity tested, gauged, straightened and shimmed. All shaft splines and load bearing surfaces lubricated with oe high temp. Materials. Includes highest quality replacement parts, including starter drive components, solenoid...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76 911 1970-73
From $399.59
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 GT3 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optimal...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 GT3 2003-05
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 GT2 2008
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 GT3 2007-11
$3,882.60
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Kit includes
-new compressor with clutch, compatible with r134a and r12
-ester refrigerant oil, compatible with r134a or r12
-r134a charge port adapters.
-kuehl kwick mounting bracket & hardware
-new compressor to rear deck lid condenser barrier hose line assembly with sae approved crimped fittings and our high-low pressure switch feature. The condenser side fitting of the hose assembly will be flare.
-new compressor to evaporator barrier short hose; with sae crimped fitting on the compressor side. This allows you to cut & splice to old suction line in the engine compartment using a barb fitting with clamps supplied in the kit.
-new receiver drier, Porsche configuration.
-detailed installation instruc...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1978-83 930 1975-77 911 1974-77 911 1970-73
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Our beautiful muffler gasket kits offer you everything you need for a perfect installation except a little labor! Don't fight rusted bolts or sae sized hardware. Specifically for the '70-74 1.7/1.8l.
Note: before ordering any 914 exhaust part, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up before connecting to the muffler. The flange gaskets...(choose a part on the right to read more)
General Fitment 914 1970-76
Our beautiful muffler gasket kits offer you everything you need for a perfect installation except a little labor! Don't fight rusted bolts or sae sized hardware. Specifically for the '75-76 2.0l.
Note: before ordering any 914 exhaust part, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up before connecting to the muffler. The flange gaskets are...(choose a part on the right to read more)
General Fitment 914 1970-76
Brombacher 958 Cayenne turbo "sound version" sport muffler without valves or tips.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are not included. Stock tips will fit or FVD quad 4" (100mm) round tips are sold separately.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$2,601.50
Make a selection
Are you experiencing vibrations in the cabin? The most likely cause is a worn transmission mount. Severely worn mounts translate to engine component wear and can even cause difficulty shifting. Our mount is manufactured in europe by an OEM supplier using the finest materials. Be sure to swap yours out during your next service. Sold individually. Central fitment in transmission carrier. 1 qty. Required per carrier. Tech tip: the bushing should be mounted with the 2 openings on the vertical plane. Now is the time to replace the old hardware as well. Below is a list of what is needed for installation. 964 1 qty. Hex head bolt m12x1.5x95 90037802702 1 qty. Lock nut m12x1.5 49020001 2 qty. Stop washers 96437525500 9...(choose a part on the right to read more)
View/Change Diagram
From $165.00
Make a selection
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up...(choose a part on the right to read more)
General Fitment 914 1970-76
Agency powers exhaust system for the 997.2 features high quality and tuned mufflers in addition to the high flow xpipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the agency power dual exhaust tips or stock tips as pictured. Since this retains the primary catalytic converters, t here are no check engine light or emissions issues.
The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware.
General Fitment 911 2009-12
$1,349.95
Make a selection
Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addi...(choose a part on the right to read more)
General Fitment 911 1978-83 930 1975-77 911 1974-77 911 1984-86 911 1987-89
$6,891.50
Make a selection
Brombacher 955 Cayenne® turbo ?sound version? Sport muffler with valves.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are not included. Stock tips will fit or FVD quad 4'' (100mm) round tips are sold separately.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipe...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$4,519.42
Make a selection
Brombacher 957 Cayenne® turbo ?sound version? Sport muffler with valves.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are not included. Stock tips will fit or FVD quad 4'' (100mm) round tips are sold separately.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipe...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
From $3,457.30
Make a selection
Gt4 clubsport ++ with the valves open. Completely civilized at low rpms and while cruising. + 11 hp & + 10 tq gain. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - 2 3/4 tubing. - 2 x 3.5 (90 mm) round tips. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - minimal resonance / drone in the cabin. - "aero quip" style motorsport muffler connections to ensure a leak free exhaust. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. Please note: gaskets a...(choose a part on the right to read more)
$5,362.50
Make a selection
Brombacher 958 Cayenne® ?sound version? Sport muffler.
- + 13 crank hp & + 12 crank torque
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality and louder volume which enhances 3.6 l Porsche® sound.
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are included.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
FVD is proud to introduce our newest line of Brombacherexhaust systems. They have been meticulously engineered for the discerning po...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
From $3,038.20
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
Brombacher panamera® s & 4s primary sport muffler
- 5 crank hp & + 4 crank torque.
- 2.5" tubing (63.5mm) straight through design for maximum power*.
- t 316 stainless steel for improved durability over t 304.
- deeper tonal quality and louder volume which enhances 4.8 l Porsche® sound.**
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
- can be used in conjunction with our 200 cell sport cats and / or our sport muffler and our tips for more power and sound.
* we decided on a straight pipe design as we found that ?x pipe? Designs robbed the panamera® s & 4s o...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$3,100.67
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
Brombacher panamera s & 4s "sound version" sport muffler - 10 crank hp & + 9 crank torque. - 2.5'' tubing (63,5mm) straight through design for maximum power. - 11 lb. Weight savings. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - quad 4'' (100mm) round tips sold separately for basic OEM systems (without Porsche sport exhaust)* - tips can be individually adjusted for personal taste. - deeper tonal quality and louder volume which enhances 4.8 l Porsche sound.** - no ecu (software) programming necessary. - will work with OEM exhaust components. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - made in Germany...(choose a part on the right to read more)
$2,476.10
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|